Laying cobblestones requires crushing and sorting the stone on the front of the best spread nekolotuyu cobblestone side (more for aesthetic reasons than the technical). Masonry natural stone are more suitable for flat specimens. Most importantly, every stone in the masonry should take the same position that he held and in nature. This situation can easily be determined by the leaves that have many kinds of natural stones. Laminate can not be put on the edge, it is fraught with rapid failure of the first stone, and then the whole structure. Natural stone structure emphasizes the predominant horizontal boulders. Stitches clutches recommended thickness of 20-30 mm. In all masonry must comply with the same thickness of the joint.
In every 2nd or 3rd row of masonry bond required by the width of 100-120 mm. The only exception is laying of cobblestones. The strength of masonry increases due to the on-the basis for reinforcement of soft wire (d 4-10 mm). This set of rules common to all types of masonry, but it is worth remembering also that each clutch has its own characteristics, but because choosing one or another way, you need to know what their characteristics. Classic.
Laying in the classical style is very simple to implement, quickly placed, but it requires a lot of preparatory work – namely, obtesyvaniya stones. If the stone purchased already chipped, then this problem is not worth it. If not, you'll have to start to handle it, and then put it. Cobblestone. Laying of cobblestones running without the preparatory work, but requires more time for selection stones, neatly fill the voids and finish seams. This type of masonry is most often used as decoration or prop for the soil in areas with difficult terrain, as well as for the basement of the fences and buildings. Mosaic. For masonry mosaic stones are carefully select the form, after which it is placed carefully, observing the constant thickness of the seam. This clutch requires a lot of time for the selection of stones. Combined masonry. Laying of natural stone can be beautifully combined with the laying of bricks or even a conventional concrete wall. In this stone must be associated with the basis of affiliation in rows of bricks dressings. In a concrete or mortar You can install wall fixtures (pieces of rebar, wire, metal studs), whose ends are tightly immure in masonry. Combined clutch – a successful architectural solution for caps the building. The combination of masonry is often used in a variety of architectural solutions, especially in the construction of private homes and cottages.