Mega Hertz

In this case we are going to go into a new article that has nothing to do with the tv, but if it is very important for technicians and more if they are dedicated to this. In this case we are going to talk about how to detect microwave leakage, but first let’s make a brief introduction: the microwave oven bases its operation on a device called a magnetron; high frequency waves (2,450 Mega Hertz) it generates, are issued by a small antenna that sends it to the inside of the oven we know that by the beginning of cooking process used in this system, for different causes can occur microwave leakage, and that this constitutes a risk of damage to the user. For this reason, we propose here, a project of leakage Tester in microwave ovens, which will help us determine whether the waves toward the outside of the computer. Verification of microwave leakage any body that receives the microwave tends to heat up by rubbing its particles; so if they go to abscond from the cavity and reach any part of our body, We can suffer burns ranging from the very mild to the third grade. It is therefore important that provided that a microwave oven repair, we’re sure not have no leaks; otherwise, we expose the integrity of the user. It is absolutely necessary to perform this check every time that service is provided to these computers. There are special care where the door is fall or have a very noticeable swing movement, and especially when discover there are points that have paint stripping in the cavity (inside, no part of the blade must be without its special paint coating, as this prevents the microwaves bounce towards sites not designated pre). If this happens, the magnetron could suffer overheating; and if unpainted points to be drilled, the microwave will come out of there.